Home » Uncategorized
Category Archives: Uncategorized
Cisco IPSec GRE Configration
interface GigabitEthernet0/1 description WAN ip address 1.1.1.1 255.255.255.224 crypto isakmp policy 10 encr aes 256 authentication pre-share group 2 crypto isakmp key Secret-Key address 2.2.2.2 ! crypto ipsec security-association replay window-size 1024 ! crypto ipsec transform-set ESP-AES-SHA esp-3des esp-md5-hmac mode transport crypto ipsec nat-transparency spi-matching ! crypto ipsec profile GRE set security-association lifetime seconds 86400 set transform-set ESP-AES-SHA ! interface Tunnel1 ip address 10.10.20.1 255.255.255.252 no ip redirects no ip unreachables no ip proxy-arp ip mtu 1400 ip tcp adjust-mss 1360 load-interval 30 keepalive 60 3 tunnel source 1.1.1.1 tunnel destination 2.2.2.2 tunnel protection ipsec profile GRE
SCP File Copying to Cisco
Router ip scp server enable
ASA Firewall ssh scopy enable
Cisco CLI output without Breaks/Pauses
Router: terminal length 0 ASA Firewall: pager 0 Wireless LAN Controller: config paging disable
How to check xDSL speed on Cisco
Depending on your router / IOS use one of following commands.
show dsl int atm 0
show controllers vdsl 0
e.g.
#show controllers vdsl 0 | in Attainable|Speed
Attainable Rate: 53188 kbits/s 9678 kbits/s
Speed (kbps): 0 39999 0 9652
#show controllers vdsl 0/0/0 | in Attainable|Speed
Attainable Rate: 21728 kbits/s 1116 kbits/s
Speed (kbps): 0 20475 0 1115
